High Pressure Fan Driver Controller
The high-voltage cooler motor driver used in single-phase 220V AC power supply system is based on the motor driver developed by our company with independent intellectual property rights.
Product Series | LSMD0150W24V |
Input Voltage | 180-277Vac 50/60Hz |
Input Current | 6A |
Driveable Motor Power | 700W Max |
Rated Motor Speed | 650RPM/Min |
Features
- Closed-loop start without position sensor
- Non-inductive FOC motor control algorithm, so that the motor noise is small
- Can control a water pump and a drain valve
- Input power overvoltage protection/under voltage protection/motor phase loss, short circuit protection
- High-temperature frequency reduction work to protect the safe and reliable operation of the motor
Application
Electrical Parameters
- Motor structure: Outer rotor
- Number of motor slot poles: 23 poles and 48 slots
- Start mode: zero-speed closed-loop start
- Motor Position Sensor: No Sensor
- Control mode: FOC sine wave vector control
- Down frequency speed regulation range: 200-650PRM
- Water pump control: 5A 250V relay
- Drain valve control: 5A 250V relay
- Work efficiency: >97%
- Heat dissipation method: forced air cooling
- Dimensions: 200*180*102mm
- Waterproof grade: IP65